For the anti rust methods of explosion-proof lever hoists, we can start with cleaning, lubrication, storage, and environmental control before and after use. The following is a specific introduction:

Clean up promptly after use:

After each use of the explosion-proof lever hoist, the surface of the equipment should be promptly cleaned of debris, stains, and possible acidic and alkaline substances to reduce corrosion and damage to the equipment, thereby reducing the risk of rust.

Regular lubrication and rust prevention:

For the lifting chain, gears and other components of the explosion-proof lever hoist, anti rust grease or lubricating oil should be regularly applied to achieve anti rust and lubrication effects. Especially in critical areas such as the interior of sprocket bearings, it is important to ensure adequate lubrication.

The surface of the steel wire rope should also be coated with anti rust lubricating oil to prevent rusting. Under non operational conditions, tarpaulins or plastic films can be wrapped around the outside of the steel wire rope to further protect it from moisture and corrosion.

Storage environment control:

Place the explosion-proof lever hoist in a dry and ventilated storage environment to prevent the equipment from getting damp and rusting.

If conditions permit, a shed can be built for the explosion-proof lever hoist to prevent it from being damaged by natural factors such as rain, wind, frost, and exposure to sunlight.

Pay attention to the usage environment:

Try to avoid using explosion-proof lever hoists in environments with strong oxidizing or highly corrosive properties. If unavoidable, the frequency of cleaning and maintenance should be increased, and consideration should be given to reducing the frequency of equipment use by using multiple hoists in sequence.

Regular inspection and maintenance:

Regularly inspect the explosion-proof lever hoist, including key components such as appearance, chain, gear, and braking system, to promptly identify and address potential corrosion issues.

For rusted parts, they should be promptly scraped off with hardwood or bamboo slices to remove rust spots and reapplied with anti rust grease. If the rust is severe, it may be necessary to replace the relevant components.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment