When purchasing a European style wire rope electric hoist, the equipment requirements for its operating trajectory should focus on track design, installation accuracy, adaptability of the operating mechanism, safety device configuration, and environmental adaptability to ensure efficient and safe operation of the equipment. The following are specific requirements and analysis:

1、 Track design requirements

Track model and material:

The track model should be selected based on the specifications and lifting capacity of the electric hoist to ensure that the track's load-bearing capacity meets the requirements. For example, square steel tracks are suitable for electric hoists with various lifting capacities and heights.

The track material should have good wear resistance and corrosion resistance to extend its service life.

Track installation accuracy:

The installation of the track should ensure levelness and straightness, avoiding the instability of the electric hoist caused by the bending or tilting of the track.

The track joint should have a smooth transition to reduce the impact and vibration during the operation of the electric hoist.

2、 Adaptability of operating mechanism

Active walking mechanism:

The active walking mechanism should be equipped with high-performance servo motors and reducers to ensure that the electric hoist can run smoothly and accurately along the track.

Active walking wheels should have good wear resistance and grip to avoid slipping or deviation.

The walking mechanism should be designed with horizontal wheel devices and reverse roller devices to correct deviations during the operation of the electric hoist and maintain stable operation.

Passive walking mechanism:

The driven walking mechanism should provide stable support to ensure that the electric hoist does not sway or tilt during operation.

The driven wheel should run synchronously with the active walking wheel to maintain the linear motion of the electric hoist.

3、 Safety device configuration

Limit device:

Electric hoists should be equipped with limit limiters for both upward and downward limits to ensure that the hook automatically cuts off the power supply when it reaches the limit position, preventing overload or collision accidents.

The limit device should be sensitive and reliable, capable of accurately controlling the operating range of the electric hoist.

Rope guide device:

The rope guide should be able to ensure that the steel wire rope is neatly arranged on the drum, avoiding the occurrence of disorderly knotting, knotting, or derailment.

The rope guide should have good wear resistance and corrosion resistance to extend its service life.

Overload protection device:

Electric hoists should be equipped with a lifting capacity limiter. When the actual lifting capacity exceeds the rated lifting capacity, it can automatically issue an alarm signal and cut off the lifting power supply to prevent overload accidents.

4、 Environmental adaptability

Working environment temperature:

The electric hoist should be able to operate normally within a certain working temperature range, such as -25 ℃ to 40 ℃.

Under extreme temperature conditions, corresponding insulation or cooling measures should be taken to ensure the normal operation of the electric hoist.

Relative humidity:

At a maximum temperature of 40 ℃, the relative humidity should not exceed 50%. At lower temperatures, higher humidity is allowed.

Electrical equipment should have good moisture resistance to ensure normal operation in humid environments.

Altitude:

The electric hoist should be able to be used normally in areas with an altitude not exceeding 1000m. When used in high-altitude areas, the correction of motor power and heat dissipation issues should be considered.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment