The lifting capacity and rotation radius parameters of European steel wire rope electric hoists are described as follows:

1、 Range of lifting capacity

The lifting capacity of European steel wire rope electric hoists is usually 1 ton to 80 tons, and some models can be customized with higher lifting capacity. The specific classification is as follows:

Lightweight (1-20 tons): Suitable for light and medium-sized industrial scenarios such as single beam cranes and gantry cranes, with working levels mostly ranging from M5-M6.

Heavy duty (32-80 tons): equipped with a variable frequency motor, suitable for high-frequency and heavy-duty scenarios such as double beam cranes and large logistics transportation, with a working level of up to M6-M8.

2、 Rotation radius range

The rotation radius (i.e. the turning radius of the electric hoist on the track) varies depending on the model and track type, and the common range is as follows:

0.5 ton model:

Track rotation radius of 1.5 meters (such as U-shaped track model 16-22b).

1-ton model:

Trajectory rotation radius of 1.5 meters to 4 meters (such as curved track model 16-28b).

2-ton model:

The trajectory rotation radius is 2 to 3 meters (such as U-shaped I-beam track models 22a-32c).

3-ton model:

Trajectory rotation radius of 2 to 4 meters (such as arc-shaped track models 22a-32c).

5-ton model:

The trajectory rotation radius is 2.5 meters to 5 meters (such as U-shaped runway model 16-28b).

10 ton model:

The trajectory rotation radius is 2.5 meters to 7.5 meters (such as U-shaped guide rail model 16-28b).

3、 Correlation analysis of key parameters

The relationship between lifting capacity and rotation radius:

The larger the lifting capacity, the larger the volume and weight of the electric hoist, so a larger rotation radius is required to ensure operational stability. For example, the maximum rotation radius of the 10 ton model (7.5 meters) is significantly higher than that of the 0.5 ton model (1.5 meters).

The influence of track type:

U-shaped track: suitable for scenarios that require circular motion (such as factory assembly lines), with a wide range of rotation radii (0.8 meters to 7.5 meters).

Straight track: The rotation radius requirement is small, but it is necessary to ensure the straightness of the track to avoid derailment.

Consideration of job level:

Electric hoists used frequently (such as M6-M8) need to be equipped with stronger tracks and larger rotation radii to reduce wear and failure rates.

4、 Selection suggestions

Select the model based on the lifting capacity:

Light duty (1-20 tons): Priority should be given to standard models such as the X series or F series.

Heavy duty mission (32-80 tons): Choose customized models such as NDX series to ensure the load-bearing capacity of motors and reducers.

Determine the rotation radius based on spatial constraints:

Space constrained scenarios (such as low clearance factories): Choose a compact design, such as a C-shaped electric hoist, with a rotation radius that can be reduced to within 2 meters.

Spacious Scene: Large rotation radius models (such as 7.5 meters for 10 ton models) can be selected to enhance operational flexibility.

Customized requirements:

If special lifting capacity or rotation radius is required, please contact the manufacturer for customization, such as adjusting the drum diameter, rope groove parameters, or track model.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment