Welcome to Hebei Mutian Lifting Equipment Manufacturing Co., Ltd.


How to operate a mobile electric hoist

releaseTime:2024-04-06 12:50:35source:Mu TiannumberOfPageViews:0

Operating a mobile electric hoist requires following proper procedures to ensure the safety of both the operator and the load being lifted. Here are general steps for operating a mobile electric hoist:

  1. Inspect the Hoist: Before operating the hoist, visually inspect it for any signs of damage or wear. Check the cable/chain, hooks, control pendant or remote, and safety features to ensure everything is in working order.

  2. Select a Suitable Location: Choose a flat and stable surface to set up the hoist. Ensure there is enough clearance above and around the load for safe operation.

  3. Secure the Load: Attach the load securely to the hook or lifting attachment using appropriate rigging techniques. Make sure the load is balanced and centered to prevent it from swinging or shifting during lifting.

  4. Power On: Turn on the power to the hoist by connecting it to a suitable electrical outlet or activating the onboard battery if applicable.

  5. Control Setup: If using a control pendant or remote, ensure it is connected properly and within reach of the operator. Familiarize yourself with the control functions, including raising, lowering, and emergency stop.

  6. Raise the Load: Use the control pendant or remote to slowly raise the load off the ground. Gradually increase the lifting speed while monitoring the load for any signs of instability or imbalance.

  7. Monitor the Load: Continuously monitor the load as it is being lifted. If the load begins to swing or tilt, lower it back down and adjust the rigging to stabilize it.

  8. Position the Load: Once the load has been lifted to the desired height, use the control pendant or remote to position it accurately. Take care to avoid collisions with obstacles or other equipment.

  9. Lower the Load: When finished with the lifting operation, carefully lower the load back down to the ground or onto a suitable surface.

  10. Power Off: After the load has been safely lowered and unhooked, turn off the power to the hoist to prevent accidental operation.

  11. Store the Hoist: If the hoist will not be used for an extended period, store it in a clean and dry location, and ensure it is properly secured to prevent damage or unauthorized use.

  12. Maintenance: Regularly inspect and maintain the hoist according to the manufacturer's recommendations to ensure continued safe and reliable operation.

Always refer to the specific operating instructions provided by the manufacturer for the particular model of mobile electric hoist being used. Additionally, ensure that operators are properly trained and familiar with the hoist's operation before use. Safety should always be the top priority when operating any lifting equipment.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoistwire rope electric hoist,manual hoist, lever hoist, pneumatic hoist and other lifting equipment    

You can also input characters200(Number of characters200)