When using cables to power the steel wire rope electric hoist, the following safety precautions should be taken:

Choose the appropriate cable: Choose the appropriate cable type and specification based on the working voltage, load current, and usage environment of the electric hoist (such as whether it is resistant to high temperature and oil pollution).

Maintenance and inspection of cables:

Regularly inspect the appearance and performance of cables, and check for any damaged areas, especially the connecting parts.

The cable connector should use a reliable connection method and be wrapped with protective tape to ensure the stability and safety of the connection.

Cables should be laid according to regulations to avoid crossing and entanglement, ensuring safe use.

After long-term use, the busbars and joints of cables are prone to loosening or corrosion. Regular inspections and tightening of busbars and joints should be carried out.

Cables should be stored in a clean and dry environment to avoid moisture or rain. If dirt is found on the surface of the wire, it can be gently wiped with a clean soft cloth dipped in some cleaning solution.

Avoid excessive use: Avoid excessive pulling or bending of cables, which may affect their conductivity and even cause safety hazards such as wire core detachment or loose joints.

Operational safety:

Operators must wear safety equipment, such as seat belts, safety shoes, gloves, and protective goggles, and remain alert.

When operating, it is necessary to follow the safety operating procedures and follow the manual requirements.

Emergency situation handling: During the lifting process, if a malfunction causes a heavy object to lose control and slide down, emergency measures must be taken to lower the object towards an unmanned area.

Maintenance and inspection of electric hoists:

After each use, the electric hoist must undergo inspection, cleaning, maintenance, and upkeep.

Timely replace vulnerable parts of the electric hoist, such as wires and cables, bearings, gears, etc., to ensure the stability and reliability of the equipment.

Personnel responsible for repairing, maintaining, and replacing equipment must wear appropriate safety equipment in accordance with regulations and comply with relevant regulations and requirements.

In summary, when using cables to power the wire rope electric hoist, attention should be paid to the selection, maintenance, operation safety of the cables, as well as the maintenance and inspection of the electric hoist, to ensure safety during use.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment