The specific steps for lifting the electric hoist are as follows:

Preparation:

Check the equipment: Carefully inspect the appearance and components of the electric hoist to ensure that there are no damaged or loose parts. Including steel wire ropes, hooks, electrical circuits, etc., ensure they are intact and undamaged.

Environmental assessment: Evaluate the work environment to ensure sufficient workspace, flat and solid ground, no obstacles around, and compliance with the requirements for using electric hoists.

Prepare to lift heavy objects: Place the object to be lifted on a flat and sturdy ground, ensuring that the object is securely fixed to prevent displacement or falling during transportation.

Prepare control device: Prepare control devices such as ropes, buttons, or remote controllers according to the model of the electric hoist.

Connect the power supply:

After confirming that all preparations are ready, turn on the power to the electric hoist. Check if the power supply voltage matches the rated voltage on the equipment nameplate to avoid damage to the equipment caused by high or low voltage.

Trial operation:

No load trial operation: Before formal lifting, conduct a no-load trial operation first. By controlling the button or remote control, the electric hoist can perform no-load lifting and horizontal movement, and check whether the equipment runs smoothly and whether there are any abnormal sounds or vibrations. If there is any abnormality, the machine should be stopped immediately for inspection and troubleshooting.

Lifting operation:

Hang the object to be lifted firmly: Hang the hook firmly on the object to be lifted, ensuring that the center of gravity of the object is stable and the binding is firm.

Slowly lift the item: Use the control button or remote control to slowly lift the item to the desired height. During the lifting process, pay attention to observing the condition of the items and the operation of the equipment to ensure the safety of the operation.

Horizontal movement and placement:

Horizontal movement of items: To move items horizontally to a designated position, it can be achieved by controlling the walking mechanism of the electric hoist. During the movement, keep the item stable and avoid shaking.

Placement of items: After reaching the designated location, slowly lower the items to the ground or designated support to ensure stable placement.

Stop operation:

Safe stop: After completing the operation, safely stop the electric hoist and ensure that the object is firmly placed in the target position.

Security cleaning:

Cleaning the work area: Clean the work area and arrange the control devices, electric hoists, and lifting objects neatly, ensuring that there are no debris or obstacles.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment