When using an electric hoist, there are typically several stages that should be followed to ensure safe and efficient operation. Here are the main stages:

1. Inspection and Preparation:

• Check the electric hoist for any visible damage or wear and tear.

• Ensure all safety features, such as limit switches and load brakes, are working properly.

• Inspect the power supply and ensure it is suitable for the hoist's requirements.

• Make sure the lifting chain or rope is in good condition and free of kinks or twists.

• Check the hook and load attachment points for wear and damage.

2. Setting Up:

• Position the electric hoist securely in its designated location, ensuring it is stable and level.

• Attach the hoist to a secure overhead structure using suitable mounting brackets.

• Connect the hoist to the power supply, following the manufacturer's instructions.

• Attach the lifting chain or rope to the load securely using a suitable sling or hook.

3. Operation:

• Turn on the power to the electric hoist and check that all indicators and displays are functioning correctly.

• Test the operation of the hoist by raising and lowering the load a short distance to ensure it moves smoothly and without obstruction.

• When lifting a load, ensure the load is evenly distributed and does not exceed the hoist's rated capacity.

• Operate the hoist using the controls provided, raising and lowering the load as required.

• Keep an eye on the load and the hoist throughout the lifting process to ensure everything is functioning normally.

4. Monitoring and Adjustment:

• Continuously monitor the hoist's performance, checking for any signs of overheating, excessive noise, or abnormal vibrations.

• Adjust the hoist's speed and position if necessary to ensure smooth and controlled lifting.

• Pay attention to any safety features that may activate, such as limit switches or load brakes, and respond appropriately.

5. Completion and Shutdown:

• Once the lifting task is complete, lower the load to the ground slowly and securely.

• Disconnect the hoist from the power supply and turn it off.

• Inspect the hoist for any signs of wear or damage after use and perform any necessary maintenance.

• Store the hoist in a clean, dry, and secure location to protect it from damage and deterioration.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment