In the process of widely using pneumatic balancers, based on their principles, time related operational points and optimization measures can be set from the following aspects:

1. Optimization of operation response time

Pneumatic control circuit: By designing an efficient pneumatic control circuit, the delay in pneumatic signal transmission is reduced, ensuring that operating instructions can be quickly converted into mechanical actions.

Response of actuator: Select highly sensitive pneumatic actuators, such as quick response pneumatic motors or cylinders, to shorten the operation response time.

2. Control of lifting time

Air pressure regulation: By adjusting the air pressure, the lifting speed of the pneumatic balancer is controlled, indirectly controlling the lifting time. Increase air pressure when rapid lifting is required; Reduce air pressure when precise control is required.

Flow control valve: Install a flow control valve to control the gas flow rate by adjusting the valve opening, thereby controlling the lifting speed and time.

3. Pressure equilibrium time

Pre inflation: Before starting the pneumatic balancer, perform pre inflation operation to quickly stabilize the internal pressure of the system and reduce pressure balancing time.

Pressure sensor: Install a pressure sensor to monitor the internal pressure of the system in real time. When the pressure reaches the set value, the balancer will automatically start working.

4. Maintenance cycle setting

Regular inspection: Based on the frequency of use and working environment of the pneumatic balancer, set a reasonable regular inspection cycle, such as conducting a comprehensive inspection once a week, month, or quarter.

Lubrication and maintenance: According to the manufacturer's recommendations, regularly lubricate and maintain the key components of the pneumatic balancer to reduce wear and extend its service life.

5. Operator training time

Theoretical training: Provide theoretical training to operators on the principles, structures, operating methods, and safety precautions of pneumatic balancers, ensuring that operators have the necessary theoretical knowledge.

Practical training: On the basis of theoretical training, practical training is conducted to familiarize operators with the performance and operating skills of pneumatic balancers in actual operation, improving operational proficiency and safety.

6. Safe shutdown time

Emergency stop device: Install an emergency stop device on the pneumatic balancer to ensure that the gas source can be quickly cut off in case of emergency, causing the balancer to stop working immediately.

Shutdown inspection: After each shutdown, perform necessary checks and maintenance on the pneumatic balancer to ensure normal operation during the next start-up.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment