The European steel wire rope electric hoist is a material handling device developed based on advanced European technology and standards (such as FEM standards). It is known for its environmental protection, energy efficiency, and high performance, making it widely used in various industrial sectors. Below is a detailed introduction to its use:

I. Basic Structure and Characteristics

Compact Structure:

The European steel wire rope electric hoist adopts a modular and lightweight design, making its structure more compact. This design reduces the overall height and self-weight of the hoist, thereby lowering the construction costs of the factory building and the operating costs of the hoist.

High-Performance Motors:

The hoist is equipped with high-performance lifting motors that provide greater horsepower and excellent cooling characteristics. These motors can sustain continuous power supply, ensuring stable and efficient operation of the hoist.

Advanced Control System:

The European steel wire rope electric hoist is equipped with an advanced electrical control system. This system can measure, calculate, and monitor the performance, safety, and operational status of the hoist, making material transportation more convenient and safe.

Multiple Safety Protections:

The hoist is equipped with more than ten safety protection measures, such as overheating protection, overload protection, and phase sequence protection. These measures ensure the safe operation of the hoist and prevent accidents.

II. Operating Procedures

Pre-operation Inspection:

Before operating the European steel wire rope electric hoist, it is essential to inspect the various components and safety devices of the hoist to ensure they are intact and functioning properly. Any abnormalities or faults should be reported and handled promptly.

Load Preparation:

Ensure that the load to be lifted is securely bundled and that its weight does not exceed the rated lifting capacity of the hoist. The load should be positioned directly below the hook to ensure stable lifting.

Starting and Lifting:

Start the hoist using the control system and adjust the direction of the boom using the rotating mechanism to move the hook to the position directly above the load.

Confirm that the hook is securely attached to the load, then operate the lifting motor to raise the load to the desired height. The lifting speed should be controlled to avoid sudden starts and stops that could cause the load to swing.

Rotating and Positioning:

While the load is suspended, rotate the boom using the rotating mechanism to transfer the load to the designated area. The立柱支架 (立柱支架, supporting column bracket) should remain fixed throughout this process to ensure stable operation of the hoist.

Lowering and Placing:

After the load has been transferred to the designated area, slowly lower it by operating the lifting motor in reverse. Ensure that the load is placed securely and does not collide with any obstacles.

III. Safety Precautions

No Overloading:

Do not exceed the rated lifting capacity of the hoist. Overloading can cause damage to the hoist and even lead to accidents.

Stable Operation:

Lift and lower the load slowly and steadily to avoid sudden starts and stops that could cause the load to swing or the hoist to become unstable.

Clear Operating Environment:

Ensure that the operating area is free from obstacles and that no unauthorized personnel are present. The ground should be level to prevent the hoist from shaking during operation.

Operator Concentration:

The operator should remain focused during the entire operating process and not engage in conversations, smoking, or other unrelated activities. They should always observe the load and the operational status of the hoist and stop the machine immediately if any abnormalities are detected.

IV. Maintenance and Upkeep

Regular Cleaning:

Clean the surface of the hoist at least once a week, especially the connecting parts of the rotating mechanism and lifting system, to prevent the accumulation of dust and oil that could affect the operation of the hoist.

Lubrication Maintenance:

Add lubricating oil to the moving parts, such as rotating bearings and steel wire ropes/chains, on a monthly basis to reduce wear and tear. The lubricating oil should be selected according to the requirements specified in the equipment manual.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment