The quality evaluation of manual forklifts (ground oxen) needs to be comprehensively considered from seven core dimensions: load capacity, hydraulic system, structural strength, operational comfort, safety, maintenance convenience, and user reputation. The specific analysis is as follows:

1、 Load capacity: a hard indicator of basic performance

Load capacity is the most fundamental and critical parameter of manual forklifts, which directly affects their applicability. High quality manual forklifts should be clearly labeled with their rated load capacity (such as 2 tons, 3 tons, etc.), and the actual carrying capacity should be consistent with the labeled value. For example, the Nori manual ground ox offers 2-3 tons of various specifications to meet the needs of different scenarios. If the forklift has bent forks, deformed body, or insufficient hydraulic system pressure when fully loaded, it indicates that its load capacity does not meet the standard and may pose a safety hazard.

2、 Hydraulic system: the core guarantee of smooth operation

The hydraulic system is the power source of manual forklifts, and its performance directly affects the operating experience. A high-quality hydraulic system should have the following characteristics:

Good sealing: Hydraulic cylinders, pistons, sealing rings and other components should be made of wear-resistant and corrosion-resistant materials to ensure long-term use without oil leakage. If the forklift encounters problems such as self lowering after the fork is raised or hydraulic oil leakage, it is mostly caused by aging or damaged seals and needs to be replaced in a timely manner.

Smooth lifting: Hydraulic pumps, multi way valves, and other components need to be precisely matched to ensure uniform lifting speed of the forks, without any jamming or abnormal noise. If frequent pressing of the handle or unstable lifting of the fork is required during operation, it may be caused by internal blockage or component wear in the hydraulic system.

Sensitive response: Safety devices such as pressure relief valves and speed limit valves need to respond quickly to ensure that power is cut off in a timely manner in case of overload or abnormal operation, in order to prevent accidents from occurring.

3、 Structural strength: the material basis for durability

The frame, forks, axles and other structural components of manual forklifts should be made of high-strength steel or alloy materials to ensure that they do not deform or break under long-term load-bearing and frequent operation. For example, high-quality forklift frames are welded with thickened steel plates, and the forks undergo special heat treatment processes, resulting in high bending strength. If the forklift experiences problems such as frame cracking, fork bending, or axle breakage during use, it indicates insufficient structural strength and needs to be immediately stopped and replaced.

4、 Operational comfort: embodiment of ergonomics

The comfort of operation directly affects work efficiency and operator health. High quality manual forklifts should pay attention to the following design:

Handle design: The length and angle of the handle should comply with ergonomic principles to reduce arm and wrist fatigue during operation. For example, some forklifts use adjustable handles to meet the needs of operators of different heights.

Wheel material: PU wheels (polyurethane wheels) have become the preferred choice for high-quality forklifts due to their advantages of wear resistance, shock absorption, and noise reduction. If the forklift is equipped with hard plastic or iron wheels, it is prone to vibration and noise when driving on uneven ground, which increases the burden on the operator.

Wide field of view: Forklift design should ensure that the operator's field of view is unobstructed during operation, making it easy to observe the goods and surrounding environment. For example, some forklifts adopt a low frame design to reduce blind spots in the line of sight.

5、 Security: an essential core element that cannot be ignored

Safety is of paramount importance in the quality evaluation of manual forklifts. High quality forklifts must have the following safety designs:

Overload protection: Limiting forklift overload through hydraulic system or mechanical structure to prevent overturning or component damage caused by overload.

Anti slip design: The surface of the fork should use anti slip textures or add anti slip pads to prevent the goods from slipping during transportation.

Braking system: Forklifts need to be equipped with reliable braking devices to ensure quick stopping in emergency situations. For example, some forklifts use foot or hand brakes, which are easy to operate and have good braking effects.

Warning signs: Forklifts should be clearly marked with safety warning signs to remind operators to pay attention to safety precautions.

6、 Maintaining convenience: the key to reducing long-term usage costs

High quality manual forklifts need to have easy maintenance and reduce long-term usage costs. Specifically manifested as:

Easy to obtain parts: The parts used by forklifts need to be universal models or easy to purchase, so that they can be replaced in a timely manner in case of damage.

Easy maintenance: The forklift structure design needs to be reasonable, easy to disassemble and assemble, reducing maintenance time and difficulty. For example, some forklifts adopt modular design, making troubleshooting and maintenance more convenient.

Low maintenance cost: Forklifts need to have a low failure rate, reducing maintenance frequency and costs. At the same time, the consumables such as hydraulic oil and lubricating oil used in forklifts need to be reasonably priced to reduce long-term usage costs.

7、 User reputation: authentic feedback verified by the market

User reputation is an important reference for evaluating the quality of manual forklifts. By reviewing reviews and word-of-mouth from other users, one can understand the performance of forklifts in actual use, including operating experience, durability, after-sales service, and other aspects. For example, if a certain brand of forklift has received widespread praise in the market and users provide feedback on its reliable quality, easy operation, and excellent after-sales service, it indicates that the brand of forklift has high quality and is worth recommending.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment