Defects in the support points of hydraulic forklifts may involve issues such as unreasonable design, component wear, hydraulic system failure, or improper operation and maintenance. Specific solutions should be provided based on the type of defect. The following are some common defects and corresponding solutions:

1、 Defects in support points caused by unreasonable design

Problem manifestation: The layout of support points is unreasonable, resulting in poor stability of the forklift during transportation and easy tipping.

Solution:

Redesign the layout of support points to ensure the stability of the forklift's center of gravity during handling.

Increase the number of support points or adjust the position of support points to improve the load-bearing capacity and stability of the forklift.

2、 Support point defects caused by component wear

Problem manifestation: The support point components (such as forks, wheel frames, etc.) are severely worn, resulting in unstable support or inability to carry goods.

Solution:

Regularly check the wear of support point components and replace severely worn components in a timely manner.

Lubricate and maintain the support point components to reduce wear and friction, and extend their service life.

3、 Defects in support points caused by hydraulic system failures

Problem manifestation: Hydraulic system malfunction causes the fork to be unable to lift or lift steadily, affecting the normal use of the support point.

Solution:

Hydraulic oil contamination: Regularly replace hydraulic oil, clean hydraulic oil tank and filter to ensure the cleanliness of hydraulic oil.

Wear of hydraulic components: Check the wear of hydraulic pumps, hydraulic valves, hydraulic cylinders and other components, and replace severely worn components in a timely manner.

Excessive oil temperature: Check if the radiator is working properly and ensure that the hydraulic oil is operating within the appropriate temperature range.

Design and manufacturing defects: For defects in the design or manufacturing process, such as unreasonable layout of hydraulic pipelines, improper selection of hydraulic valves, etc., it is necessary to contact the manufacturer for improvement or replacement.

4、 Defects in support points caused by improper operation and maintenance

Problem manifestation: Improper operation or untimely maintenance by the operator leads to damage or performance degradation of support point components.

Solution:

Operator training: Provide professional training to operators to ensure they are familiar with the operating procedures and maintenance requirements of forklifts.

Regular maintenance: Develop a regular maintenance plan, conduct comprehensive inspections and maintenance of forklifts, and ensure that support point components are in good condition.

Avoid overloading: Strictly follow the rated load of the forklift for handling operations to avoid overloading causing damage to support point components.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment