Safety management is crucial for the safe operation of explosion-proof electric hoists. The following is a summary of safety management for explosion-proof electric hoists:

1、 Equipment selection and installation

Equipment selection:

Explosion proof electric hoists that meet national and industry standards, have explosion-proof marks and explosion-proof inspection certificates should be selected.

Ensure that the electrical and mechanical parts of the electric hoist meet explosion-proof requirements to avoid explosions caused by sparks or high temperatures.

Installation and debugging:

Before installation, the appearance, electrical components, and explosion-proof performance of the equipment should be carefully inspected to ensure that there is no damage or defect.

Install according to the original factory regulations and installation instructions, ensuring that the equipment is securely fixed and the running track is smooth and unobstructed.

During debugging, it is necessary to run without load, check whether the actions of each mechanism are smooth, whether the braking is reliable, and whether the limit protection device is sensitive and effective.

2、 Usage and Maintenance

Usage safety:

Operators should undergo professional training, be familiar with equipment performance and operating procedures, and be certified to work.

Before use, check whether the power supply voltage, cables, steel wire ropes, etc. are normal. Only after confirming that there are no errors can the equipment be started.

Overloading is strictly prohibited, and prolonged operation in harsh environments (such as high temperature, humidity, corrosive gases, etc.) should be avoided.

During the operation, attention should be paid to the operation status and load of the equipment, and any abnormalities should be immediately stopped for inspection.

Maintenance:

Regularly clean, lubricate, and inspect the equipment to ensure that all components operate flexibly, without wear or damage.

Check if the electrical components and explosion-proof performance are intact, and replace damaged or aged components in a timely manner.

Steel wire ropes should be regularly inspected and replaced to avoid problems such as broken wires, severe wear or deformation.

3、 Safety management and supervision

Security management system:

Develop a safety management system and operating procedures for explosion-proof electric hoists, clarify safety responsibilities and management requirements.

Regularly provide safety education and training to operators to enhance safety awareness and operational skills.

Safety inspection and supervision:

Regularly conduct safety inspections on equipment, including electrical systems, mechanical components, protective devices, and other aspects.

Strengthen the supervision of the operation process of operators to ensure compliance with operating procedures and safety requirements.

Set up safety warning signs and isolation measures to prevent non operators from entering hazardous areas.

4、 Emergency response

Emergency plan:

Develop an emergency plan for explosion-proof electric hoists, clarify emergency response procedures and rescue measures.

Regularly organize emergency drills to improve emergency response and disposal capabilities.

Emergency Management:

When a malfunction or accident occurs, the power should be immediately cut off and the equipment should be stopped from running.

Quickly organize personnel to evacuate the hazardous area and take corresponding rescue measures.

Timely report to superiors and relevant departments, and cooperate in investigating and handling the causes of accidents.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment