1、 Efficient homework: Improve logistics turnover speed

Quick loading, unloading, and handling

Forklifts can achieve vertical lifting of goods (with a gantry height of over 6 meters) and horizontal movement, with a single operation cycle (from picking up to stacking) taking only 30-60 seconds, far exceeding manual handling efficiency.

Application scenario: In the warehouse center, forklifts can cooperate with conveyor lines to quickly transfer goods from trucks to shelves, with a daily processing capacity of up to hundreds of tons.

High load capacity

The load range of internal combustion forklifts is usually 1-50 tons, while electric forklifts can reach 3-8 tons, meeting the handling needs of goods of different scales.

Case: At the port container terminal, heavy-duty forklifts can handle 20 foot standard containers in a single operation, significantly improving loading and unloading efficiency.

Continuous homework ability

Electric forklifts can work continuously for 6-8 hours after charging for 1 hour, while internal combustion forklifts can work continuously for more than 12 hours after refueling, suitable for three shift production mode.

Data: After a certain automobile manufacturing plant introduced forklifts, the material turnover time on the production line decreased by 40%, and the annual production capacity increased by 15%.

2、 Flexible adaptation: meet diverse homework needs

Multi scene coverage capability

Storage scenario: Three way stacking forklifts can complete high-level shelf access in narrow passages (only 1.8 meters wide), increasing storage density by 30%.

Outdoor scene: Off road forklifts are equipped with four-wheel drive and floating tires, which can operate in complex terrains such as mud and sand, and adapt to environments such as construction sites and agricultural bases.

Special scenario: Explosion proof forklifts have passed ATEX certification and can be safely used in flammable and explosive places such as chemical, oil and gas industries.

Quick replacement system for accessories

Forklifts can use hydraulic quick couplings to replace accessories such as paper roll clamps, turners, and push-pull devices, achieving "one vehicle for multiple uses".

Case: In a paper mill, forklifts equipped with paper roll clamps can transport 3 rolls of paper rolls with a diameter of 1.5 meters at a time, increasing efficiency by 5 times.

Space utilization optimization

The forward moving forklift is designed with a gantry that can stack goods in a limited space, increasing warehouse area utilization by 25%.

Data: After a certain e-commerce warehouse introduced narrow channel forklifts, the storage capacity increased from 100000 to 150000 items, without the need to expand the factory building.

3、 Safe and reliable: reduce operational risks and costs

Active safety design

Fall prevention system: The roof protection frame undergoes dynamic load testing (such as withstanding the impact of a 1-ton cargo falling from a height of 2 meters) to protect the safety of the driver.

Stability control: The electronic stability system (ESC) can monitor the vehicle speed and steering angle in real time, automatically adjust the distribution of driving force, and prevent rollover.

View optimization: The panoramic cab design ensures unobstructed front view, while the reversing camera system assists in observing obstacles behind.

Passive safety protection

Braking performance: Hydraulic braking system response time ≤ 0.3 seconds, no-load braking distance ≤ 3 meters (at a speed of 20km/h).

Warning device: The volume of the reversing buzzer should be ≥ 85 decibels, and the LED warning light should have a visible distance of up to 50 meters in low light environments.

Cut down the accident rate

Data comparison: After the introduction of forklifts, the damage rate of goods in a certain logistics center decreased from 0.8% to 0.2%, and personnel injury accidents decreased by 70%.

Cost savings: Safety design can reduce downtime losses, insurance claims, and legal dispute costs caused by accidents.

4、 Economy: Whole life cycle cost optimization

Balancing procurement and usage costs

Electric forklift: The initial procurement cost is relatively high, but the energy consumption cost is low (about one-third of that of internal combustion forklifts), and the maintenance is simple (no engine maintenance). The total cost can be saved by 20% -30% in 5 years.

Internal combustion forklift: suitable for high-intensity and long-term operations. Although the fuel cost is high, it has strong power and is suitable for heavy cargo handling.

Maintain convenience

Modular design: The control system and hydraulic system adopt standardized modules, reducing fault diagnosis time by 50% and maintenance costs by 30%.

Remote monitoring: Real time monitoring of forklift operation status (such as battery level and engine temperature) through IoT technology, early warning of faults, and reducing unplanned shutdowns.

Residual value rate

After 5 years of use, the residual value rate of well-known brand forklifts (such as Toyota and Linde) can still reach 40% -50%, which is higher than that of ordinary brands (20% -30%).

5、 Intelligent upgrade: adapting to the trend of Industry 4.0

Automated Navigation

AGV forklifts achieve unmanned driving through laser navigation or visual recognition technology, and can operate continuously for 24 hours with an accuracy of ± 10mm.

Case: After a certain electronics factory introduced AGV forklifts, the on-time delivery rate of materials on the production line increased to 99.9%, and labor costs were reduced by 60%.

data association

The Forklift Management System (FMS) can be integrated with WMS and ERP systems to transmit real-time job data (such as handling capacity, energy consumption, and fault codes) and optimize production scheduling.

Function: Predicting maintenance needs through big data analysis, extending equipment lifespan, and reducing sudden failures.

Human machine collaboration

Collaborative forklifts are equipped with force feedback sensors, which can work in conjunction with manual operations (such as guiding forklifts to complete fine stacking), enhancing flexibility.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment