Forklift use protection inspection method

To ensure the safe operation of forklifts, it is necessary to conduct systematic inspections from multiple aspects such as appearance, operation, hydraulic, braking, visibility, tires, electrical systems, fasteners, and operating standards. The specific methods are as follows:

1、 Appearance and structural inspection

Overall appearance: Check the forklift for any obvious damage, such as dents, scratches, or cracks, to ensure that there is no structural damage.

Component fastening: Focus on checking whether the cantilever, fork arm, body, roof and other components are loose or detached to prevent accidents caused by component detachment during operation.

2、 Inspection of control panel and control device

Core components: Check whether the steering wheel, joystick, and pedals are damaged or loose, ensuring flexible operation without jamming.

Instruments and switches: Confirm that the dashboard indicator lights are working properly, and all control switches (such as lights, wipers, and rearview mirror switches) can be operated normally.

Safety facilities: Check the status of seats and seat belts to ensure comfort and effective protection.

3、 Hydraulic system and lifting component inspection

Hydraulic system: Check whether the hydraulic oil tank and oil pipe are leaking, whether the hydraulic oil is clean and the oil volume is sufficient.

Lifting components: Confirm that the fork arm, fork head, and spiral rod are not worn or deformed. During the lifting test, observe whether the speed is uniform and whether there is any jamming or abnormal noise.

4、 Brake system inspection

Braking performance: Conduct a braking test in an open area, apply the brakes after acceleration, and check if the brakes are responsive without any "sudden braking" phenomenon.

Brake fluid level: Confirm that the brake fluid level is within the normal range to avoid brake failure caused by low fluid level.

5、 Visual inspection

Driving vision: Stand in the driver's seat and check if you can see the surrounding environment clearly, ensuring there are no blind spots or blurred vision.

Rearview mirror: Confirm that the rearview mirror is clear and can observe the situation behind. Adjust the angle or replace the damaged rearview mirror if necessary.

6、 Tire inspection

Wear and pressure: Check the degree of tire wear to ensure there is no risk of cracking or bursting, and confirm that the tire pressure meets the standards.

Tire tightening: Check if the wheels are tightened to prevent tire detachment during operation.

7、 Electrical system inspection

Lighting system: Check whether the headlights, turn signals, brake lights, etc. are working properly to ensure safety at night or in low visibility environments.

Alarm: Test the sensitivity of the alarm to ensure timely warning in emergency situations.

8、 Inspection of fasteners and protective devices

Fasteners: Regularly check whether all fasteners (such as bolts and nuts) of the forklift are securely fastened to prevent loosening and component detachment.

Protective device: Check whether the guardrail and protective cover are intact to ensure effective protection of the operator from accidental injuries.

9、 Operation standards and training inspections

Operator qualification: Confirm that forklift drivers have received professional training and hold valid certificates to avoid accidents caused by unlicensed operations.

Operating standards: Check whether the operator complies with safety regulations such as forklift speed limits and load capacity limits to ensure safe operation.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment