For the cleaning and replacement of accessories for Chain Hoists, the following are detailed steps and precautions:

1、 Cleaning of chain hoist accessories

Preparation work:

Ensure that the chain hoist is deactivated and disconnect the power supply.

Prepare the necessary cleaning tools, such as cleaning agents, brushes, rags, chain cleaning brushes, etc.

Cleaning process:

Use chain cleaner or WD-40 cleaner while rotating the chain and spraying.

Use a brush or chain cleaning brush to remove dirt and attachments from the chain.

Wipe the chain dry with a clean cloth to ensure there is no residual cleaning agent or moisture.

matters needing attention:

Choose appropriate cleaning agents to avoid corrosion or damage to chains and sprockets.

Be careful when cleaning, ensuring that all dirt and attachments are removed to avoid affecting the transmission efficiency and service life of the chain.

2、 Replacement of Chain Elevator Accessories (Taking Chain as an Example)

Preparation work:

Confirm that the chain hoist has been deactivated and disconnect the power supply.

Prepare the necessary tools, such as wrenches, chain clamps, etc.

Purchase a new chain suitable for the chain hoist.

Remove the old chain:

Separate the sprocket and chain, and remove the old chain.

Use tools such as a wrench to remove the nut on the sprocket and the connecting pin on the chain.

Install new chain:

Install a new chain on the sprocket and place a new connecting pin.

Connect the chain and sprocket together to ensure a secure connection.

Adjust the tension of the chain to ensure that it is not too loose or too tight during the transmission process.

Adjustment and testing:

Connect the power and test the operation of the chain hoist.

Observe the transmission of the chain to ensure that it is smooth and free from jamming during the transmission process.

If any problems are found, make timely adjustments and repairs.

matters needing attention:

When replacing the chain, ensure that the new chain matches the specifications and models of the old chain.

When installing a new chain, ensure that the connection is firm to avoid detachment or breakage during the transmission process.

When adjusting the tension of the chain, it should be adjusted according to the actual situation to avoid affecting the transmission efficiency and service life of the chain due to being too tight or too loose.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment